Simple Installation
Compatibility:
- Prosim737 -Beta-
- X-Plane11/12 Zibo and LevelUp
- P3D PMDG737
- MSFS2020 PMDG737
- MCP supports MobiFlight and SPAD.neXt.
- Synchronized and Dimmable: Backlight and Display Brightness
- Silicone Rubber Buttons with LEDs
- A/P Disengage Controlled with 2 Toggle Switches
- Power adapter (220V/110V->5V/2A EU type)
- 1 meter USB cable added
http://coreflighttech.com/2022/10/08/how-to-connect-modules-with-spad-next/
http://coreflighttech.com/2021/01/04/import-taxes-or-duties/
Bogdan constantin (verified owner) –
Excellent product and excellent support service
Marvin N. (verified owner) –
Great product. Great customer support. Do your self a favor. Get it! It works beautifully.
Shane Burrows (verified owner) –
Initially i was skeptical as on the website it states no returns and no paypal option. Took the plunge after reading some reviews and the MCP arrived quickly to Australia, well packaged. Was a little difficult to setup, but got past some issues with updating my pc to allow the correct port via their youtube clip (plays too fast so paused several times). First problem was the mcp does not like a usb hub, so port update refused to work until i connected it directly. Second problem was allowing the port access through my pc firewall (google “enable port access” for the fix). All good now, spad.next works perfect on pmdg 737, and have manually assigned most buttons to work on fbw a320nx (no digit display yet). Ive rated it 4/5 because there is no way to screw unit into my panel.
tom schwarz (verified owner) –
I am very satisfied with the service and help I received from ACELYA KAYA due to the delay of my order, but in the end I got my panel in good condition. look forward to further cooperation
patrick.halff (verified owner) –
I received my MCP yesterday after only a couple days wait. A very fast shipping indeed by UPS. I had the MCP programmed with the Spad.next hex-file from the Github site ( see video ), and then followed the instructions, and managed to copy the online snippet for the entire device.
So the entire set-up took about 15 minutes, no more. It works beautifully together with MSFS2020 and PMDG-B737-700. There is no lag when turning the selector knobs. I used to own a CPFlight MCP, which are usually at the heart of a much larger setup using daisy chain. The problem there is, there always seems to be some kind of delay, between what the MCP shows, and what is seen on the screen.
But not here. Too bad the auto-throttle does not disconnect with an electro-magnetical servo switch, but that would things much more expensive. And it is certainly no deal breaker. Quite the opposite: the price is very attractive, and the build is superb. Well done.
Nalin B. (verified owner) –
The MCP is very well built and looks like the real one. As I was familiar with Mobiflight software, the initial setup took me about five minutes. The feel of the knobs, buttons and display greatly enhanced my MSFS PMDG 737 experience. I am planning to get the EFIS too now!!! Furthermore the product arrived earlier than expected, well packed. This is a great product and I highly recommend it.
JUAN ESGUERRA (verified owner) –
Nico (verified owner) –
Top quality
Top service
Hadi K. (verified owner) –
Great product! Very easy to get it up and running with SPAD.Next with the adequat firmware and snippet. It adds a lot of immersion when flying! All functions are working perfectly with the PMDG in MSFS.
I don’t think you can get better for this price, you have to be creative for mounting it as there is no easy way to do it. When you turn on the DC power it makes some noise (for the cooling) but not an issue when you have the sim running. (and you don’t have to turn the DC power on if you don’t need the backlighting).
You can also adjust the displays brightness and backlight.
Overall it’s a great product and very enjoyable to use as you barely need to use the mouse anymore.
I regret not buying the glareshield pack including the EFIS!
Daniel (verified owner) –
Great addition to my simulator setup. I love the realism and the fact that it closely resembles the real deal.
The controls feel sturdy and have nearly no input lag. The build quality is great too.
The setup of the product could’ve been a bit easier, but with the docs and some fiddling around I got it to work within an hour.
The shipping is was very good and quick. I got it from Turkey to Germany in a few days, with a really good shipping company (UPS). I forgot that I had to pay import and customs costs upon receiving, which was a pretty big sum, but that’s my mistake. Just be aware that this might be the case for you too.
All with all, very good experience with a great product! Will definitely buy more from CoreFlightTech!
Michael Bassey (verified owner) –
This MCP panel is just great with the PMDG B737. It arrived within 10 days across continents, well packed and undamaged. It functions as the real MCP and makes flying less stressful as clicking on the screen is reduced. Core Flight Technologies provide rapid assistance in setting it up. The price is reasonable compared to other panels. I also bought an EFIS. I am very satisfied with the overall purchase and after-sale support.
B.P.G. van Lier (verified owner) –
Very impressive and functional MCP panel
Алексей К. (verified owner) –
Все работает в Х-Plane 11 и 12 Zibo-Mode 737 и работает как надо… Продовец отзывчивый, перед покупокой задал наверно 100/500 вопросов – на все получил ответ.
Панель пришла быстра, хорошо упакованная.
Не много правда пришлось со временем дороботать.
1. Пластиуовые кнопки покрыты лакорасочным изделеем который на прямых солничных лучах наченает плыть и становится липким. Пришлось все отмывать и заново покрывать лаком устойчевым к ультрафеолетовым лучам.
2. Ручки на энкодорах все одинаковые – хотелось бы большей прадоподобности как в реальном Boeing 737 MCP.
3. Каротковат USB кабель.
ЗЫ Но повторюсь в Целом девайс достойный. И собираюсь в дальнейшем прикупить Boeing 737 EFIS Panel
chris wu (verified owner) –
Customer service is one of the best I ever experience.
Leo de Haan (verified owner) –
Again, great piece of kit. Well worth it.
Jean G. (verified owner) –
Good price, quick delivery, good service !
Munetaka Usui (verified owner) –
Claudio DiBiase (verified owner) –
Works great happy with it. The help i recieved was excellent. These people don’t just sell you something and forget about you great work
Shiran Atapattu (verified owner) –
Great 👍
Stefano Favilli (verified owner) –
Really good product! I wish the negative vertical speed display issue could be fixed (is there a solution, at present?)
Aurélien Houdbine (verified owner) –
enhanced immersion, thank for your help to install
Kam (verified owner) –
I had this product for about one year. During the first month i had a slight problem, however, customer support was fast and amazing and everything has been working perfectly since and I am super happy with this product .
ANDRES FELIP SEVILLANO CUENCA (verified owner) –
Im pilot of B737 and all that i want you to know that is an excellent product!!!!!!
Scott (verified owner) –
Fantastic product and amazing after sales support
Federico (verified owner) –
It’s the previous model. That perfectly work with all platform and simulator. Very easy to install and set up. Great value for money
Jasper (verified owner) –
At first, the module didn’t seem to work. So I send a video of the problem to the company, they were very helpfull! To problem was a lose cable for the power adaptor, which I coincidentally had lay around at home. After Installing the module, it worked great! It is a real must-have for the b737 flight-simmers!
Alexander Melnikov Chemberdzhi (verified owner) –
works very nicely with X-Plane 11 and Zibo mod
Carlos Robles (verified owner) –
Great products and support
Steven Wolter (verified owner) –
Jonathan Inman (verified owner) –
Superb finish quality and amazing customer service. Very happy with this purchase. And intend to buy more items as my collection grows. Thanks so much so far.
stefanlueders83 –
MCP works perfect with PMDG and MSFS. The installation took only a few minutes. Great product!
After ordering the MCP it arrived within 7 days.
Thank you and greetings from Germany!
grisubr –
Das MCP 737 ist wunder bar, die Hilfe von CoreFlighttech Team ist mehr als 5 Sterne wert. Super schnelle Hilfe, Bin sehr gut durch die Programme geführt worden.
Werde euch auf jeden fall weiter empfehlen.
allen weiter Hin einen Guten Flug!
Michael W. Bassey –
I have enjoyed flying simulators for about 40 years and have tried many equipment . A constraint is to have a “cockpit that can be used for all types of aircraft. A real wish is to minimize clicking on the screen. I have been searching for reasonably priced and relatively simple hardware but that has been a challenge, until another sim-pilot mentioned Core Flight Technologies.
I contacted them in December 2022 with questions and got quick and honest answers. I determined that they were genuine, had an MCP and EFIS that would work seamlessly with the PMDG 7337 aircraft for MSFS2020. I ordered these equipment and was assured that their operation with the B737-800 I wanted to buy would be fine.
The MCP and EFIS were delivered within about 10 days across continents!! I installed my aircraft and the Flight Core panels. I had a bit of problem getting Mobiflight to connect the B737 and the panels. I was given instructions by Yasar Kayar on what to do and it worked partially. He then intervened to finalize the connection between the B737 and the MCP and EFIS panels.
My comments above are not a reflection of problems with the equipment but with the learning process of setting up sims. The equipment works and very well. I should stress that Flight Core helps to make sure their equipment works and it only takes less than 10 minutes with a few clicks of the mouse. I was impressed with their confidence in their equipment and willingness to provide the after sales assistance.
Based on my experience, I would like to recommend the following to Flight Core Tech:
1. For those who do not like to seek support, a short, detailed instruction on installing MobiFlight and connecting it to the MCP and the B737 would be helpful.
2. I had to be creative in setting up the cockpit because there is no evident way of mounting the MCP and EFIS. (I successfully mounted them solidly on the Honeycomb Alpha Yoke and Bravo Throttle Quadrant and beside my Saitek Radio Panel).
As Yasar Kayar said, there is a learning curve to get exactly what one needs. For example, I now need to find ouf how to get the panels to work with a range of different aircraft types. Kayar informed me that there are blogs where support can be found. The point I am making is that the MCP and EFIS can be fully valorized by leaning more from users of MobiFlight and SpadNext.
In conclusion: the MCP and EFIS are very good buys, reasonably priced, excellent after sales service, they perform as advertised. These panels allow for less clicking on the screen while flying.
Thank you
Graham Wilson (verified owner) –
Excellent product and moreover Excellent after sales support! I had a small issue with some files for the firmware and within a small time frame all was solved. Build quality is good and everything is working well with the PMDG 737 in MSFS2020
Jaap Riemens (verified owner) –
A perfect MCP, not only does it look great, it also works great and the bonus for me is that it both works with MobiFight and Spad.Next. When you don’t know how to set it up, no worries, the profiles are there to download. When you still need support, the have a great customer service. So, the price is very reasonable and it’s an MCP for lots of realistic flying!
sincereguy (verified owner) –
X plane 11 zibo
I’ve got MCP, EFIS and NAV radio.
They works great woth ZIBO 737. It wasn’t easy to configure myself but Yasar helped me out. Thanks!
Tonique (verified owner) –
Excepcional Producto.
maroshem (verified owner) –
Received my MCP and EFIS and I am really happy with these products. The build quality is very good. I required some help setting up for MSFS2020 PMDG 737 and the customer service support was amazing! I wish they had a youtube video tutorial, but anyways hands down the best support you can get. They will make sure your up and running. I can’t thank Core Flight Tech enough. Thank you for bringing these products to market and your support is very well appreciated. If you are in doubt about purchasing…just do it!You won’t regret it. Worth every penny:)
Alan (verified owner) –
Received my MCP panel a few weeks ago and after testing it out I can say its absolutely brilliant.
Works great and feels great.
highly recommend this product and gives your sim the ultimate feel.
*Using with MSFS2020 and PMDG 737*
Thank you core flight technologies
simlandings (verified owner) –
Absolutly fantastic product. Very high Standard and a very good price.
kroralsurgery (verified owner) –
I have used the Core Flight EFIS and MCP for the Boeing 737-800X for the past year and they have worked perfectly. Recently purchased another set (EFIS and MCP) with the new pushbuttons. All the buttons and encoders are smooth and realistic to the touch. Workmanship is excellent. They look great in the sim.
Bruce –
After trying to install the software for my new MCP I Emailed the company and asked for assistance.
Within 10 minutes Yasar got in touch and he spent nearly two hours getting my system set up.
I am deeply grateful to Yasar for his help.
Well done Core and especially Yasar
Maksim (verified owner) –
Hello everybody! I bought a lot of devices from this seller. Fast delivery and feedback. Everything works well in my cabin. You can safely buy.
kroralsurgery (verified owner) –
Purchased B737 EFIS and MCP. Quality of products is excellent. Encoders have a very smooth feel. Had a small software issue which was resolved quickly. Excellent customer support. Can’t wait for more products to come out. Thank you Coreflight
Robert L (verified owner) –
Fantastic product and service. 5 Stars.
Tony –
Being a flight Simulator fan for some considerable years, I decided to spend more time on my hobby
in my retirement. I had recently purchased X-Plane 11 along with the Zibo Mod B737.
I also visit a fixed based simulator on a monthly basis.
I initially purchased the B737 EFIS and MCP panels from Core Flight Technologies. Both arrived
promptly and I was given immediate assistance to help install the drivers. This service was
exceptional.
This led me to purchase the Radio and Nav panels which again promptly arrived, and these needed a
simple driver setup which I achieved within minutes of their arrival.
All four units are working really well and are making my immersion into the Flight Simulator a real
experience as I am no longing messing about with keyboard commands.
The build quality of all the units is excellent, followed up by great friendly service, I am looking
forward to seeing as to what next is coming from Core Flight Technologies.
Tony F.
Alex (verified owner) –
I would like to express my gratitude to the Core Flight Tech team for all-round assistance in installing my 737 MCP for the x-plane11. All my questions were answered quickly and the MCP was fully installed. Everything works perfectly. Special thanks to Master Mohamed. Good job!
Ernest (verified owner) –
I ordered 737MCP for the X-Plane 11 Zibo and it was delivered quickly. CoreFlightTech team help me a lot during the installation process and everything worked out smoothly.
I highly recommend these products and will definitely use again CoreFlight for my next purchase!
Safe flights all!
Tim Dolan –
Got the MCP yesterday, shipping time was good and the Core Flight Team helped me to set it up. Good product at a really nice price. Recommand it !
csevketoglu (verified owner) –
I need efis and mcp for the my boeing 737 home cockpit. I ordered these producks from Core Flighttech and recived them in the specified time.
They helped a lot during installation and my questions. I am very satisfied with the producks and close attention. The most valuable parts of my
cockpit. Thank you so much. Cemal Şevketoğlu